View source for The leaky tank mystery 2024

== Supervisors ==
*[[Derek Abbott|Prof Derek Abbott]]
*[[Benjamin S. Cazzolato|Prof. Ben Cazzolato]]

== Honours students ==
*[[Eric Tsoukatos]]
*[[Michael Stefani]]

==Project guidelines==
*[http://www.eleceng.adelaide.edu.au/personal/dabbott/project_handbook_2009.pdf Project Handbook]

==General project description==
Imagine one of those railcars that has a big horizontal water tank.  Pretend it is frictionless.  Imagine the tank is full.   Imaging there's a hole at the top to let air in. Imagine the tank is leaking through a small hole on the left bottom side of the tank.  Assume the jet of water is vertically downward. Does the resulting change in momentum push the railcar to the left or the right?

This is a very famous problem that has never been properly solved. We need finally put it to rest.  We will give you papers showing attempted solutions that contradict each other. You may try to search for more papers on the topic.

The experiment is almost impossible to do in practice as the forces are smaller than the friction you get in real life. This explains why there are contradictory solutions.  This illustrates an important principle in engineering that your can never be sure of the theory until you do the experiment.

But the modern world of engineering now has simulation tools that we trust and are as good as an experiment provided we don't feed it with wild parameters outside of the range that models are valid.

We want you to do the "experiment" in simulation using Comsol and/or Ansys.  The Faculty has licences. Find the answer. Then go and find which theory paper got it correct.  Then nicely explain that theory yourself, written out clearly in your own way.

This is a beautiful classic problem and it will be a lot of fun. If you can think of a clever way to actually do a low friction experiment and video it, this will be a cherry on that cake and your name will go down in history. Suggest you design a rectangular tank and suspend it hanging with four cords attached to the corners.  You'll need to design a release valve for the water that is actuated by a remote (because you can't touch the tank). Suggest you bounce a laser pointer off the tank as a way of measuring deflection.  However, you need to fully simulate the tank first to get all the size parameters right to optimize the size
of the deflection.

==Specific Tasks==

List out the specific tasks you need to do to complete this project:

* etc 

* etc

* etc

==Deliverables==

===Semester 1===
* Start Project Work (Week 1)
* Proposal seminar
* Progress report 
** [[File:Progress Report - Leaky Tank.pdf]]

===Semester 2===

* Ingenuity Poster
** [[File:Leaky Tank Ingenuity Poster.pdf]]
* Ingenuity Video
** [https://youtu.be/5_Zfb_bVuRI]
* Final Report
** [[File:Leaky Tank Project - Final Report.pdf]]

== Weekly progress and questions ==
Weekly progress and questions were recorded in our minutes.
*[[File:The Leaky Tank Mystery - Meeting Minutes.zip]]

==Approach and methodology==
Through use of COMSOL and simulative software a set of optimal dimensions for a physical tank can be designed. Using these dimensions a physical model of the tank can be built. This physical model can then be used in experimental testing to observe and analyse the motion of the leaky tank.

== Relationship to possible career path==
The skills learnt from simulating, experimenting, and project managing this problem will be relevant to a wide range of engineering careers, as well as various aspects of fluid mechanics and understanding the behaviour of fluid.

== References and useful resources==
If you find any useful external links, list them here:
* [http://kirkmcd.princeton.edu/examples/tankcar.pdf Motion of a leaky tank]
* [http://kirkmcd.princeton.edu/examples/haldane.pdf Haldane's cart]

==Back==
*[https://myuni.adelaide.edu.au/webapps/portal/frameset.jsp Back to MyUni]
*[http://www.eleceng.adelaide.edu.au/personal/dabbott Back to Derek Abbott's homepage]
*[http://www.eleceng.adelaide.edu.au Back to EEE Department page]
*[http://www.adelaide.edu.au Back to the University of Adelaide homepage]
*[https://www.eleceng.adelaide.edu.au/personal/dabbott/wiki/index.php/Cipher_Cracking_2012 Back to Cipher Cracking 2012 homepage]